Proper inspection tips for Clark forklifts

Mickey | General | Sunday, December 26th, 2010

Before you operate your forklift truck, make sure that you inspect it on a daily basis. If you notice any broken or missing Clark forklift truck parts notify your supervisor immediately. You can find a safety checklist in your operating manual, or you can print one from the Internet. Here are some of the areas which you need to inspect before you operate your Clark forklift.

Be sure to carefully inspect the condition of your forklift truck tires and wheels. Some of the things you need to look for are missing lugs, abrasions, or large cuts that can affect the stability of your tire. Do not use a forklift truck with unsafe tires as you can dramatically increase your chances of being involved in an accident.

Make sure that you thoroughly inspect the batteries on your electric forklift truck as well. Make sure that the cables are properly insulated, and that you do not have any spilled electrolyte material on top of the actual battery itself.

Check all of the important fluid levels on your forklift truck, such as the hydraulic oil, motor oil, radiator fluid, etc. This is very important to make sure that your machine does not break down. Using a forklift truck with improper fluid levels can cause catastrophic failures.

Make sure that all the gauges are working on your forklift truck. Some Clark forklift parts you will want to check are your turn signals, backup sirens, and your horn as well. Notify your supervisor immediately, if you notice any safety violations which can affect the operation of the Clark forklift truck.

Inspect the brake pads on your forklift truck both visually and physically. Visually check and make sure that the brake pads are not worn out. You should also physically test the brake pedal, to make sure there are no leaks in the hydraulic system.

Inspecting your Clark forklift truck is extremely important, if you want to reduce your chances of being involved in an accident. Accidents can occur when forklift operators do not inspect their equipment for any potential issues before they use them.

No Comments »

No comments yet.

RSS feed for comments on this post.

Leave a comment

Powered by WordPress | Theme by Roy Tanck | Free SEO by Court's Internet Marketing School | Get Tranquility White WP Theme